Product selection accessories laboratory technology

Support with product selection
 Product classification
 Inserts/modules
 Baskets
 Basket design
 Mobile unit
 Accessories category
Reset all filters
Helpful links
Results: for 
Sort by:
E 106Insert

for the optimum loading of wide-necked glassware, measuring cylinders, etc.

E 106/1Insert

for the optimum loading of wide-necked glassware, measuring cylinders, etc.

E 106/2Insert

for the optimum loading of wide-necked glassware, measuring cylinders, etc.

E 109Insert

for the optimum loading of beakers up to 250 ml.

E 110Insert

for the optimum loading of beakers from 250 to 600 ml.

E 111Insert

for the optimum loading of beakers from 600 to 1,000 ml.

E 134Insert

for optimum loading of 210 slides.

E 144Insert

for the optimum loading of up to 18 beakers.

E 149Insert

for the optimum loading of 80 test tubes, 16 x 105 mm.

E 329Mobile unit

for the optimum loading of narrow-necked glassware.

E 336Irrigation sleeves

for the optimum loading of pipettes/MIS instruments in injector units.

E 340Mobile unit

for the optimum loading of narrow-necked glassware.

E 352Injector nozzle

for the optimum cleaning of the wash items.

E 353Locking retainers

height-adjustable for optimum positioning of laboratory glassware on the nozzle.

E 354Locking retainers

height-adjustable for optimum positioning of laboratory glassware on the nozzle.

E 362Blind stopper

for the sealing of fittings to load carriers.

E 385Mobile unit

for the optimum loading of narrow-necked glassware.

E 406Mobile unit

for the optimum loading of up to 116 pipettes.

E 408Mobile unit

for the optimum loading of up to 96 pipettes.

E 414Mobile unit

for the optimum loading of narrow-necked glassware.

A 13Lid

for fixing delicate wash items.

ID 90Injector nozzle

with plastic supports, Ø 3, length 90 mm.

ID 110Injector nozzle

with plastic supports, Ø 3, length 110 mm.

ID 140Injector nozzle

with plastic supports, Ø 4, length 140 mm.

ID 160Injector nozzle

with plastic supports, Ø 4, length 160 mm.

ID 180Injector nozzle

with plastic supports, Ø 4, length 180 mm.

ID 200Injector nozzle

with plastic supports, Ø 6, length 200 mm.

ID 220Injector nozzle

with plastic supports, Ø 6, length 220 mm.

ID 240Injector nozzle

with plastic supports, Ø 6, length 240 mm.

E 118Insert

for optimum loading of half petri dishes.

E 136Insert

for optimum loading of 56 half petri dishes.

E 137Insert

for optimum loading of 56 half petri dishes.

E 402Insert

for optimum loading of up to 44 watch glasses.

E 403Insert

for optimum loading of up to 105 watch glasses.

A 3Cover net

as cover for wash items in inserts.

AK 12Insert

for the loading of different utensils.

O 187Upper basket

for the optimum loading of narrow-necked glassware.

A 14Lid

for fixing delicate wash items.

DE-CS7-78Appliance lid

for the top cover on the machine, 70 cm deep, 90 cm wide.

UE 30-60/60-78Box plinth

to raise the machine, 60 cm deep, 60 cm wide.

UC 30-90/70-78Box plinth

to raise the machine, 70 cm deep, 90 cm wide.

U 175/1Lower basket

for the optimum loading of narrow-necked glassware.

U 184/1Lower basket

for optimum loading of centrifuge tubes, phials or test tubes, for example.

U 874/1Lower basket

for the optimum loading of different inserts and mesh trays.

E 319/3Surface filter

for optimum protection against contamination from labels or glass splinters.

A 11/1Insert

for the gentle cleaning of delicate items by interrupting the water jet.

A 12/1Insert

for the gentle cleaning of delicate items by interrupting the water jet.

E 405/1Mobile unit

for optimum loading of up to 38 pipettes, connection for hot air drying.

E 103/1Insert

for the optimum loading of test tubes up to 12 x 75 mm.

E 104/1Insert

for the optimum loading of test tubes up to 12 x 105 mm.

E 105/1Insert

for the optimum loading of test tubes up to 12 x 165 mm.

E 139/1Insert

for the optimum loading of test tubes up to 12 x 200 mm.

A 100Upper basket

for the optimum loading of injector modules or inserts.

A 101Upper basket

height adjustable, for the optimum loading of inserts.

A 102Upper basket

height adjustable, for the optimum loading of inserts.

A 150Lower basket

for the optimum loading of injector modules or inserts.

A 151Lower basket

for standard DIN mesh trays and various inserts.

A 200Mobile unit

for the optimum loading of 38 pipettes.

A 300Module

for the optimum loading of laboratory glassware.

A 300/1Module

for the optimum loading of laboratory glassware.

A 301Module

for the optimum loading of laboratory glassware.

A 301/1Module

for the optimum loading of laboratory glassware.

A 301/2Module

for the optimum loading of laboratory glassware.

A 301/3Module

for the optimum loading of butyrometers.

A 302Module

for the optimum loading of laboratory glassware.

A 302/1Module

for the optimum loading of laboratory glassware.

A 303Module

for the optimum loading of up to 98 pipettes.

A 304Module

for the optimum loading of up to 98 vials.

A 306Module

for the optimum loading of large-volume laboratory glassware.

A 802Nozzle

for the optimum cleaning of the dispenser compartment.

DOS K 85Dispenser module for 5–10 l containers

with level indicator for the automatic dispensing of liquid cleaning agents.

DOS K 85/1Dispenser module for 5 l containers

with level indicator for the automatic dispensing of liquid cleaning agents.

DOS G 80Hose dispenser pump for 5-10 l containers

with level indicator for the automatic dispensing of liquid detergents.

DOS G 80/1Hose dispenser pump for 5 l containers

with level indicator for the automatic dispensing of liquid detergents.

PG 8596Dispensing cabinet

For process chemicals and dispenser modules

PG 8596Dispensing cabinet

For process chemicals and dispenser modules

UG 30-60/60-85Box plinth

to raise the machine, 60 cm deep, 60 cm wide.

UG 30-90/60-85Box plinth

to raise the machine incl. side unit, 60 cm deep, 90 cm wide.

MC/2Transfer trolley

height adjustable, for loading and unloading washer-disinfectors.

UG 30-90/70-85Box plinth

to raise the machine, 70 cm deep, 90 cm wide.

DE-CS7-85Appliance lid

for the top cover on the machine, 70 cm deep, 90 cm wide.

XKM 3000 L MedCommunication module

for connection to the Segosoft Miele Edition or other software.

A 840Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 1 item. 

A 841Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 1 item

A 842Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 1 item 

A 843Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 1 item

A 844Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 1 item.

A 845Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 1 item.

A 300/2Module

for optimum loading of laboratory glassware – can be equipped with 8 nozzles.

A 301/4Module

for optimum loading of laboratory glassware – can be equipped with 18 nozzles. 

A 302/2Module

for optimum loading of laboratory glassware – can be equipped with 32 nozzles.

A 860Holder rack 

for injector modules A 300/2 and A 300/3

A 861Holder rack 

for injector modules A 301/4 and A 301/5

A 862Holder rack 

for injector modules A 302/2 and A 302/3

A 840/1Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 5 items.

A 841/1Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 5 items 

A 841/2Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 10 items 

A 841/3Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 20 items

A 840/2Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 10 items.

A 840/3Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 20 items.

A 842/1Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 5 items 

A 842/2Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 10 items

A 842/3Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 20 items

A 843/1Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 5 items

A 843/2Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 10 items

A 843/3Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 20 items

A 844/1Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 5 items.

A 844/2Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 10 items. 

A 844/3Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 20 items.

A 845/1Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 5 items.

A 845/2Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 10 items.

A 845/3Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 20 items. 

A 300/3Module

for optimum loading of laboratory glassware – can be equipped with 8 nozzles. 

A 301/5Module

for optimum loading of laboratory glassware – can be equipped with 18 nozzles.

A 302/3Module

for optimum loading of laboratory glassware – can be equipped with 32 nozzles.

*SRP - all prices include VAT
**all prices include VAT, plus shipping costs
Features dependent on model – Illustration(s) as an example, for information